M-VAVE FM-1 firmware

ORBIT

SLOOP-based groovebox with OP-1-inspired screens and an event tape. by dspaudio

ORBIT preview from its author
Preview by dspaudio (opens in a new tab)

About

ORBIT builds on SLOOP with synth, drum and mixer screens inspired by the OP-1, and an event tape for copying and moving what the four tracks play.

Groovebox

Install and safety

Untested. No compatibility reports yet. Maru has not tested it on hardware.

Try in browser (author’s emulator) (opens in a new tab)

There is no browser installer. Follow the instructions in the author’s repository.

Coming after hardware verification. Maru will offer installs only after its own installer has completed a full install and restore on a physical M-VAVE FM-1, and only for open-source releases whose authors have been told.

  • Put the unit on stock V15 first, and keep your own copy of the stock file from M-VAVE’s downloads (opens in a new tab) so you can go back.
  • Back up your presets with the current firmware’s own export before installing.
  • Rescue: none documented for this firmware.
  • If something goes wrong, follow the recovery ladder.
  • No browser installer: releases carry the firmware file, installed from a terminal with a script from the repository.